Ubiquiti PoE+ Injector 802.3at

Compact PoE+ Injector capable of delivering 30 W of power to your Ubiquiti Access Points and Cameras

The U-PoE-AT is a PoE+ injector designed to power 802.3at compatible devices. Capable of delivering 30W of PoE+ power, the U-PoE-AT can be used to power any U6 Access Point (U6-LR, U6-Lite, U6-Pro), while also protecting against electrical surges.

  • 802.3at PoE Injector: power any 802.3at compatible devices via the Ethernet cable.
  • 30W Power: Provides up to 30W of PoE+ (802.3at) power.
  • Gigabit Ethernet: Maximum speed Ethernet throughput.
  • Remote Reset Capability: reset button to restart the device from the power source.
  • ESD Safe: Surge protection and Clamping protection.
  • AC cable with earth ground provided.

Full Specifications:

Dimensions 93 x 62 x 35 mm (3.66 x 2.44 x 1.38″)
Weight 156 g (5.5 oz)
Output Voltage 48VDC @ 0.65A
LAN Activity Indicator No
Gigabit LAN Port Yes
Remote Reset Capability Yes
Reset Button No
Rated Voltage 100-240VAC @ 50/60Hz
Input Current 0.75A@90VAC
Inrush Current <100A Peak @230VAC, 26℃
Efficiency 87%
Output Ripple 1% Max.
Switching Frequency 70 kHz Max.
Line Regulation ≤ 3%
Load Regulation ≤ 5%
2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-)
4-Pair Powering
Operating Temperature 0 to 40° C (32 to 104° F)
Storage Temperature -30 to 70°C (-22 to 158° F)
Operating Humidity 35 to 90% Noncondensing
AC Connector IEC-320 C6
Data IN / POE RJ45 Shielded Socket
Surge Protection Difference and Common Mode
Clamping Protection 11V Data, 60V Power
Max. Surge Discharge 1500A (8/20 μs) Power
Peak Pulse Current 36A (10/1000 μs) Data
Shunt Capacitance <5 pF data
Response Time <1 ns
Certifications CE, FCC, IC, UL